







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Whitney Homeowners Choose KraftMaid Construction
Penhallow Remodeling Whitney provides independent KraftMaid construction service in Whitney, NV – cabinet installation, refacing, kitchen design and layout, and full kitchen remodeling using KraftMaid cabinetry. We’re an independent remodeler, not a KraftMaid dealer or authorized agent. What sets our KraftMaid work apart is that we know how these boxes are built, which hardware wears out first in desert heat, and how to repair them without voiding your coverage. Call (833) 721-7402 for a free estimate.
Whitney sits unincorporated between Las Vegas and Henderson along Boulder Highway, which changes how a kitchen job runs here. Most homes on these parcels went up between the 1950s and 1970s, and a fair number of the additions and cabinet replacements we open up were never permitted. Builders here answer to Clark County, not a city code office, so permits route through county channels and inspections follow county timelines. We pull those permits before a single KraftMaid box comes off the pallet, and we get a written price to you first – the number on day one is the number on the invoice.
Cabinet installation in Whitney runs $4,000 – $13,000 depending on box count, door style and whether we’re hanging new cabinetry or squaring up a wall that’s been out of plumb since the Nixon administration. KraftMaid Vantage, Aspen, Prelude and the Hanover and Fairmont collections from the KraftMaid Cabinetry Collections all come through our hands regularly. We install Cambria and Silestone tops over them, and Kohler and Moen fixtures alongside. Our technicians have up to 22 years of experience. Every job carries the 365-Day Done Right Promise in writing.
Why Trust Penhallow Remodeling Whitney for Your KraftMaid Construction?

We’ve installed and serviced KraftMaid cabinetry across Whitney and the surrounding Las Vegas Valley long enough to know the product’s quirks by touch. The Vantage series uses a particular hinge pattern and screw-hole spacing that punishes a sloppy install; the Aspen line’s painted finishes behave differently in our dry heat than they do in a humid climate back East. When a homeowner tells us their soft-close drawers stopped closing softly, we usually know which glide failed and why before we open the cabinet.
That familiarity is what makes warranty-safe service possible. KraftMaid’s own coverage protects the cabinetry against manufacturing defects, and a repair done carelessly – drilled in the wrong place, patched with the wrong filler, forced into a frame that wasn’t reinforced – can complicate a claim. We source OEM KraftMaid hardware and touch-up materials whenever they’re available, and we document what we replaced and why. When OEM parts are backordered or discontinued, we use aftermarket hinges and glides that meet or exceed original specs, and we tell you plainly which is which.
We are not authorized, endorsed, or affiliated with KraftMaid. We’re an independent remodeler. That independence is why we can give you a straight answer about whether a repair is worth doing or whether replacement makes more financial sense. Written price before any work starts, background-checked and uniformed technicians, a live person on the phone 24/7. That’s the standard on every Whitney job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Whitney
These are the KraftMaid issues we see most often in Whitney homes, and the reasons behind each one.
- Soft-close drawer glides that stick or slam. The undermount glides on Vantage and Prelude drawers wear out at the roller and the damping mechanism. In Whitney’s heat, the lubricant inside the glide dries and the drawer starts to slam within a few years. The fix is a glide replacement, not a new drawer box.
- Door hinges loosening or breaking at the screw holes. Cabinet frames here are often anchored into older, drier wall studs, and the hinge screws work loose over time. Doors sag, then rub the frame. We reinforce the screw holes with hardwood dowels or inserts and re-hang the door on fresh hardware.
- Painted or stained finishes chipping, peeling, or fading. Sun-exposed cabinet faces along east and west walls take a beating in the Mojave summer. Aspen and Hanover painted finishes are the most vulnerable. We touch up with OEM color-matched materials and can advise on UV exposure if you’re planning a window change.
- Particleboard or MDF core swelling near the sink or dishwasher. Water intrusion is the killer. The core swells, the box goes out of square, and the door stops closing flush. This one we assess honestly – sometimes the box is salvageable, sometimes it isn’t.
- Out-of-square boxes in older Whitney homes. Cabinets installed against a wall that’s been settling for fifty years don’t sit right. We shim, scribe and adjust so the reveals are even and the doors actually close.
A typical scenario: a homeowner notices several KraftMaid Vantage cabinet doors in their kitchen no longer close flush, and the soft-close feature has quit. The usual cause is worn hinge mechanisms and loose screws in the cabinet frame. A qualified local pro replaces the hinges with OEM or high-quality aftermarket equivalents, reinforces the screw holes with hardwood dowels or inserts, and adjusts the doors for proper alignment and smooth operation.
KraftMaid Parts & Our Repair-vs-Replace Approach

Parts sourcing for KraftMaid work comes down to a trade-off. OEM KraftMaid hardware keeps your cabinetry consistent with the factory spec and is the safest path if you’re inside a warranty window. Aftermarket hinges and glides from reputable manufacturers often exceed original specs – better damping, heavier steel – and cost less. We’ll tell you which is which and let you decide. We don’t claim to stock KraftMaid parts locally; each job is sourced for what it actually needs, and lead times vary by part.
Repair versus replace is where an honest contractor earns their keep. A single failed glide is a repair. A whole run of water-swollen MDF boxes near a leaking dishwasher is usually a replacement. We look at the box integrity, the finish condition, and the cost of the fix against the cost of new cabinetry, then give you a written number for both paths. No pressure either way. If you’re weighing a repair against a full kitchen remodel, call (833) 721-7402 – estimates are free and we’ll put both numbers in writing.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the KraftMaid boxes, hinges, glides, and finish in person, identify the model line and series where we can, and photograph the failed components. You get a written assessment of what’s wrong and why.
- 2
Written price and scope. Before any work starts, you receive a written price with line items – parts, labor, permit fees if applicable. The Kingswell standard: say the price before the work.
- 3
Repair or install. OEM or quality aftermarket parts go in with reinforced screw holes and proper adjustment. If it’s a new KraftMaid installation, we pull the Clark County permit and coordinate the inspection.
- 4
Test and adjust. Every door and drawer gets cycled. Soft-close is verified. Reveals are checked for evenness. We don’t call it done until it operates the way it should.
- 5
Written guarantee. Every job carries the 365-Day Done Right Promise in writing. If something fails inside the guarantee period, we come back and fix it at no charge – free return visit, no service call fee.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Whitney
We work with the full range of KraftMaid lines you’ll find in Whitney homes: the Vantage series, the Aspen series, the Prelude series, and the Hanover and Fairmont collections from the KraftMaid Cabinetry Collections. That covers the standard door styles, finishes, and glide systems across the line. On the install side, we handle cabinet installation and refacing, kitchen design and layout, and full kitchen remodeling – including the countertop, backsplash, island, and fixture work that surrounds the cabinetry. If you’re unsure which KraftMaid line you have, we can usually identify it from the door profile and the hardware.
We Also Service These Brands
KraftMaid isn’t the only cabinetry and fixture line we work with. We install and service Kohler and Moen plumbing fixtures, Cambria and Silestone and Caesarstone countertops, Toto and Grohe fittings, and James Hardie siding on the exterior side of things. That multi-brand capability matters in Whitney, where homes often mix generations of products from different manufacturers in the same kitchen. One call covers all of it.
FAQs – KraftMaid Construction Service in Whitney

No. We’re an independent remodeler and are not authorized, endorsed, or affiliated with KraftMaid. We install and service KraftMaid cabinetry because we know the product well, not because the manufacturer backs us. That independence lets us give you an unbiased recommendation on repair versus replacement. Call (833) 721-7402 for a free estimate.
Yes, whenever they’re available. We source OEM KraftMaid hardware and color-matched touch-up materials to keep your cabinetry consistent with the factory spec. When OEM parts are backordered or discontinued, we use aftermarket hinges and glides that meet or exceed original specifications and we tell you which we’re using. Call (833) 721-7402 to discuss your specific part needs.
Most hinge and glide repairs are completed in a single visit. A full cabinet installation typically runs several days to a couple of weeks depending on box count and whether we’re pulling Clark County permits. We give you a real completion window in writing before work starts. Call (833) 721-7402 for a written scope and timeline.
We service and install the Vantage, Aspen, and Prelude series, plus the Hanover and Fairmont collections from the KraftMaid Cabinetry Collections. If you’re not sure which line you have, we can usually identify it from the door style and hardware. Call (833) 721-7402 and we’ll figure it out together.
Not if the work is done correctly. Repairs that follow proper procedure and use compatible parts preserve your KraftMaid coverage. Careless work – drilled in the wrong spot, patched with the wrong material, or forced into an unreinforced frame – can complicate a claim. We document exactly what we replace and why, so your records stay clean. Call (833) 721-7402 with questions about your specific warranty situation.
Kitchen remodels in Whitney run $14,000 – $45,000 depending on layout, cabinet line, and countertop material. Smaller kitchens land $9,000 – $20,000. Cabinet installation alone runs $4,000 – $13,000, and a single hinge or glide repair is a fraction of that. Call (833) 721-7402 for an exact quote – estimates are free, and you get a written price before any work starts.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Book Your KraftMaid Service in Whitney, NV
Whether it’s a handful of failed hinges or a full KraftMaid kitchen, Penhallow Remodeling Whitney gives you a written price before any work starts and a written guarantee on the back end. Background-checked, uniformed technicians. A live person answers the phone 24/7. Call (833) 721-7402 to schedule your free estimate in Whitney.
Written by the team at Penhallow Remodeling Whitney.












