







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Whitney?
Walk-in shower installation in Whitney typically costs $4,500 to $12,000, with most homeowners landing near $7,500 for an acrylic or tile shower with a low curb and a single glass panel. The wide range comes down to two things: the size of the shower and the material you choose for the walls and floor. A straightforward acrylic unit sits at the low end; a curbless tile shower with frameless glass, a linear drain and a bench pushes toward the top.
We give written pricing before any work starts, so the number you get on day one is the number on the invoice. No “we’ll see what demo reveals” surprise after the drywall is open. If you’re early in planning, our home page lays out how we handle every project, or you can go straight to our Whitney service area page to book a walk-through.
Quick Answer at a Glance
- Typical Whitney cost: $4,500 – $12,000 for a walk-in shower install
- Most common final spend: around $7,500
- Leads time: 3 – 7 working days for a standard shower, closer to 2 weeks for curbless tile
- Permit: usually required when you move plumbing or change the drain location
- Guarantee: 365-Day Done Right Promise, in writing, on every install

Walk-In Shower Installation Cost Breakdown (2026)
Here’s what the different parts of a Whitney walk-in shower actually run. These are our written-range figures, not ballpark guesses.
| Line Item | Typical Range |
|---|---|
| Full walk-in shower installation (all-in) | $4,500 – $12,000 |
| Tile shower with curb (walls + floor) | $6,500 – $9,500 |
| Curbless (zero-threshold) tile shower | $8,500 – $12,000 |
| Acrylic or fiberglass shower surround | $4,500 – $6,500 |
| Frameless glass panel or door | $900 – $2,200 |
| Framed sliding glass door | $350 – $900 |
| Linear drain upgrade (vs. center drain) | $400 – $850 |
| Built-in bench or niche | $350 – $1,200 |
| Valve, trim and showerhead (Kohler/Moen-grade) | $400 – $1,100 |
| Waterproofing membrane and cement board substrate | included in tile ranges |
| Demo and haul-away of old shower | $450 – $1,200 |
| Small plumbing relocation (drain or valve) | $350 – $900 |
| Permit (when required) | $150 – $600 |
The single biggest mover inside that table is tile versus acrylic. A tile shower gets you a custom look and a much longer service life, but it also means building a proper waterproofing membrane and cement board substrate (the moisture-resistant layer behind the tile) before a single square is set. That substrate work is what separate tile showers from assembled units, and it’s why labor swings the number the way it does. If you’re weighing a walk-in shower against other bath upgrades, our tub-to-shower conversion guide covers the cost of going the other direction, and the full bathroom remodel cost page shows what a whole-room scope runs.
What Affects Walk-In Shower Installation Pricing in Whitney
Whitney sits on the east side of the Las Vegas Valley, and a handful of local conditions shape the price in ways a generic pricing guide won’t tell you.
- Hard water and mineral scale. Whitney’s water runs hard, and that affects material decisions. We push homeowners toward glass and tile that handle scale better, and we often spec a water softener loop when we open the wall. That adds $250 – $500 but saves you a decade of scrubbing.
- Shower size and shape. A 36-by-48 alcove is the cheapest footprint. Going to 60 inches, adding a bench, or building a custom shape with a knee wall adds $800 – $2,500 depending on tile and drain layout.
- Curb versus curbless. A curbless shower requires lowering the subfloor or building up the surrounding floor, plus a linear drain. Plan on $2,000 – $3,000 over the same shower with a curb. It’s the single upgrade most Whitney homeowners ask about for aging-in-place, and it’s worth the number if you plan to stay.
- Glass choices. Frameless glass costs roughly double a framed door but reads cleaner and lasts longer. Standard clear glass is the affordable pick; low-iron (starphire) glass, which stays clearer against hard water, adds $300 – $600.
- Plumbing condition. Whitney homes built in the 1990s and early 2000s often have original valve trim that needs replacing while the wall is open. We flag this during the walk-through so it’s a written line item, not a surprise.
- Tile selection. A porcelain tile at $4 – $8 per square foot runs a fraction of what a designer slab or large-format marble-look tile costs. Tile alone can swing the job by $1,500 – $3,000.
How Whitney’s Climate Factors In
Desert heat and dry air are hard on shower assemblies. Tile and grout expand and contract through the temperature swings between a 110°F summer afternoon and a 60°F winter morning. That’s why we use a flexible, uncoupling waterproofing membrane under the tile rather than setting directly on the substrate. It costs a little more up front and it’s the difference between a shower floor that lasts 20 years and one that cracks at year four. It also means our 365-Day Done Right Promise is a real guarantee, not wishful thinking.

How to Save on Walk-In Shower Installation
A walk-in shower is one of the higher-value upgrades you can make to a Whitney bathroom, and there are real ways to keep the number in the lower half of the $4,500 – $12,000 range without cutting corners where it matters.
- Keep the footprint. Reusing the existing drain and valve location saves the plumbing relocation line, typically $350 – $900.
- Choose a curb. A low curb versus curbless saves $2,000 – $3,000 and performs just as well for most households.
- Pick porcelain tile over natural stone. Porcelain handles hard water better anyway and saves $1,000 – $2,500 on a typical shower.
- Go framed glass. A quality framed sliding door from a recognized brand like Kohler or Moen saves $700 – $1,300 over frameless and holds up fine.
- Skip the slab, keep the tile. If you love a designer slab look, consider a feature wall on one side and field tile elsewhere.
- Bundle. A shower install as part of a larger bathroom remodel shares demo, plumbing and finishing labor and typically saves $800 – $1,500 versus standalone.
We include a free estimate and a written price before any work starts, and the number on day one is the number on the invoice. If you want to see how this fits with the rest of a bath scope, the small bathroom remodel cost page shows what a tighter room runs, and the shower replacement guide covers the swap-only option.
How Long Does a Walk-In Shower Installation Take in Whitney?
A standard walk-in shower with a curb and tile walls takes 3 to 7 working days. A curbless shower with a linear drain and custom bench runs closer to 8 to 14 working days because of the floor build-up and the waterproofing cure time.
The schedule breaks down roughly like this: Day 1 is demo and haul-away. Days 2 – 3 are plumbing rough-in, substrate and waterproofing membrane. Days 4 – 5 are tile on the walls and floor. Days 6 – 7 are grout, glass installation and trim set. Curbless jobs add the floor lowering work and drain cure time, which is where the extra week comes from. We give you a written arrival window on the first day and stick to it, and a live person answers the phone 24/7 if you need to reach the crew mid-job.
Is Walk-In Shower Installation Worth It in Whitney?
Yes, for most Whitney homeowners. A walk-in shower returns roughly 60 – 70% of its cost in resale value, and in this market it also moves the sale faster. Buyers in Whitney, Sunrise Manor and the surrounding east-valley neighborhoods put ample showers near the top of their list, and a clean, well-built walk-in shower shows better in a showing than a dated tub-shower combo.
The value case isn’t only resale. If you’re staying put, an easier, safer step-in is worth real money year after year. We recommend scheduling a free walk-through so we can see the existing plumbing and give you a written number that matches the actual job, not a spreadsheet estimate.
When to Repair, Replace, or Upgrade Your Shower
If your existing shower has a cracked pan, recurring leaks at the curb, or grout that keeps failing within a year, the fix is almost always a full replacement rather than a patch job. A patched shower pan that fails again in six months is money spent twice.
For Whitney homeowners weighing options, the shower replacement page covers the full swap, while tub-to-shower conversion handles the case where you’re replacing a tub. If the rest of the bath needs work too, look at the full bathroom remodel, the small bath scope, and the vanity installation guide for the accompanying line items. If you’re comparing across service types in the area, the kitchen remodel cost page uses the same pricing logic and helps calibrate the numbers.
Why Choose Penhallow Remodeling Whitney for Your Walk-In Shower
We put three things in writing before the work starts: the price, the arrival window, and the guarantee. Not a range, not a verbal ballpark. That’s the Kingswell standard, and it’s how we’ve operated since the founding of that standard in 2004.
Our technicians have up to 22 years of experience, are background-checked, and arrive in uniform. You know exactly who’s in your home. We install Kohler and Moen fixtures and source tile and glass from recognized brands, so the materials behind the guarantee are as solid as the promise.
The 365-Day Done Right Promise is simple: if the shower fails during that year, we return and fix it at no charge. No service call, no re-inspection fee. Every Penhallow location is independently owned and operated as part of the Kingswell family of companies, so local accountability is built in.
If something does go wrong, we don’t hand you a phone tree. A live person answers, day or night.
FAQs – Walk-In Shower Installation Cost
How much does a walk-in shower cost in Whitney?
A walk-in shower install in Whitney typically runs $4,500 to $12,000, with a common sweet spot around $7,500 for a tiled shower with a low curb and frameless glass panel. The lower end is acrylic; the upper end is a curbless custom tile job with a bench and linear drain. Call (833) 721-7402 for an exact written price for your bathroom, free of charge.
Is it cheaper to install a walk-in shower or convert a tub?
Convert-to-shower is usually cheaper, $3,500 to $10,000, versus $4,500 to $12,000 for a from-scratch walk-in shower, because the plumbing and footprint are often already in place. That said, if the existing tub needs its drain moved, the cost of the conversion climbs toward the walk-in range. Call (833) 721-7402 and we’ll tell you which one makes sense for your bathroom.
Do I need a permit for a walk-in shower in Whitney?
You need a permit when you move or add plumbing, most commonly for a drain relocation or a valve change on a curbless conversion. Whitney-area permits typically run $150 to $600. A straight replace-in-place with no plumbing changes often doesn’t require one. Call us and we’ll confirm what your specific project needs before we quote the job.
Can you install a walk-in shower in a day?
No. A standard walk-in shower takes 3 to 7 working days, and a curbless job takes 8 to 14. The reason is waterproofing and cure time: the membrane and tile need time to set before they can be walked on or set under glass. We give you a written arrival window on day one and hold to it. For a free estimate call (833) 721-7402.
What’s included in your walk-in shower installation price?
The written price includes demo and haul-away, substrate, waterproofing membrane, tile, glass, valve and trim set, and cleanup, with amounts consistent with the $4,500 – $12,000 range. It also includes the 365-Day Done Right Promise. If we find hidden plumbing damage during demo, you get a written change order to approve, never a surprise invoice. Call (833) 721-7402 for a free estimate and written price.
Get Your Written Walk-In Shower Price
If you’re ready for a number you can hold us to, call (833) 721-7402. We’ll schedule a free walk-through, give you a written price before any work starts, and answer any question you have. Our technicians have up to 22 years of experience, we’re background-checked and in uniform, and a live person answers the phone 24/7. Start with a look at our Whitney service area or our services overview to see how we work, then call and let’s talk about your shower.
Pricing reflects the Whitney market as of 2026. Penhallow Remodeling Whitney offers free estimates – call (833) 721-7402.
What Our Customers Say
"Redid two bathrooms at once. The crew protected the floors and cleaned up every single day before leaving. Quote was detailed and there were no mystery charges at the end."
- Tricia Dawson"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike"Kitchen and dining room opened up into one space. They were honest about which wall could come down and which couldn't, no sugarcoating. Dust was kept way down with plastic everywhere."
- Oscar Benitez












